Transportation And Storage; To Set The Product In Transport Position - HTC 400 Manual Del Usuario

To set the product in transport
position
Put some type of protection on the product during
transportation. The protection keeps natural elements
such as rain and snow away from the product.
The product can be divided into 2 components. This
makes the transportation easier.
Always move the product with the lifting eye and the
handlebar.
1. Disconnect the motor cable from the electric
enclosure (A).
926 - 001 -

Transportation and storage

A
2. Push the handle on the central hinge and at the
same time fold the top frame forward to transport
position.
3. Loosen the lock bolts (A) some turns to release the
pressure.
A
C
4. Pull out the lock pins (B) and remove the lock bolts
(C) on each side of the grinding head.
5. Remove the wheel chassis from the grinding head.
B
17