Chacon IPCAM-FE02 Manual De Uso página 6

A. Camera interface
A: Camera setting: allow you to configure all functions of the camera:
Ø Owner: person who manage the camera
Ø SN: serial number of the camera
Ø Share: manage the camera sharing
Note1: To share the camera to anyone, the new person needs firstly to create his
own account in the application Chacon cam+. Then, click on "+" and register the
new account with whom to share the camera.
Note2: For security reasons, the visitor accounts don't have all the rights to control
the camera, some of the functions are unusable.
Ø SD Card: manage the memory
Note1: Install a high-capacity micro-SD card (class 10) in the camera for continuous
recording up to 24 hours.
Ø Sleep mode: manage the turn on/off of the camera
Ø Receive alarm message: need to active this function if you want to
receive push notification on your smartphone when motion detection.
Note1: To receive the push notifications, you must enable the "Chacon cam+"
notifications in the settings of your smartphone.
Ø Video flip: allow you to flip the image of your video by 180°.
Ø Motion: enable and disable the motion detection.
Ø Sound detection: enable and disable the sound detection. You can
adjust the detection sensitivity (low, medium or high).
Ø Playback settings: To adjust the timing of a recorded video.
Ø Version: version of the software.
Ø Delete camera: bin at the top right of the screen. Allow you to delete
the camera.
6