POWER SUPPLY _ __________________________
Notes
Charge up the batteries completely
7
before using them for the first time
or if you have not used them for a
long time (approx. 2 hours timer
controlled charging).
– Plug symbol flashing in red when
charging, battery symbol will light
in white when full charged, sym
bol will light in white when using,
plug symbol will flashing in red
when low power.
The ambient temperature should be
7
between 5°C and 40°C.
When fully charged, the appli
7
ance works for about 50 minutes.
This depends on the attachment
being used. It is not advisable to
charge the batteries after every
use, especially if you do not use the
appliance for the full battery capac
ity.
Charge the batteries at your con
7
venience only when they are com
pletely discharged. This increases
their service life. Avoid charging
every day.
Using the charging stand
1
Plug the socket of the appliance into
the charging stand
2
Plug the power cord into the socket
on the charging stand.
3
Plug the adapter into the wall socket.
Mains operation
(with the adapter)
Check that the voltage indicated on the
type plate of the adapter corresponds
to your local power supply.
The only way to disconnect the appli
ance from the power supply is to unplug
the adapter.
1
Insert the power cord into the socket
on the appliance.
2
Plug the adapter into the wall socket.
Caution
When in the bathroom or next to a
7
water connection, you must only use
the appliance in battery mode; never
run it from the mains.
D
.
ENGLISH
29