FUXTEC RM51SA96 Instrucciones De Uso Originales página 45

Original User Manual FUXTEC FX-RM51SA96_rev03
rooms
4) Keep the engine, exhaust silencer, and fuel tank free of grass, leaves, or excess
grease. Never leave containers with cuttings in rooms
5) For safety reasons, do not use the device if parts are worn or damaged. Claims
should be replaced. Repairing damaged parts is not sufficient. Use original spare
parts. Features that are not of the same quality can damage the device and
endanger your safety.
6) If the fuel tank needs to be emptied, you should do this outdoors and with the
engine cold
7) Wear solid working gloves when removing or reattaching the blade
8) Check the firm and balanced fit of the blades after sharpening and reattach
9) Regularly check the self-closing protective shield and grass catcher bag for wear
and abrasion
10) If you operate, transport, or tilt the device, you should observe the following
- Wear solid working gloves;
- Hold the device in places that provide a firm grip. Pay attention to weight
distribution.
25. Care, maintenance, and storage
CHANGING THE BLADES
Remove the screw to replace the blade. Empty the fuel tank before removing the
blade.
Replace everything as shown. Fasten the screw properly. Fastening torque is 45Nm.
Also, replace the blade screw when replacing the blade.
45