Hitachi HT-66S Manual Del Usuario página 7

@ Repeat play (auto-repeat)
Perform steps 1 through 5 in
1-5
"For automatic play" on the
previous page.
REPEAT -3ee
H Manual play
Depress the REPEAT switch)
and make the repeat indicator
light.
Depress the START/CUT
switch), then the platter)
starts rotating, the tonearm(4
is lowered onto the disk and
play starts.
When play is completed and
the tonearm (4 returns to the
arm rest(), the play operation
will start again automatically.
(Play can be repeated count-
less times, if so required.)
REPEAT —oO
To release the repeat play
function, depress the REPEAT
switch and turn off the
repeat indicator. When play is
completed, the tonearm (4)
returns to the arm rest (3) and
the platter) stops. When the
START/CUT switch is depres-
sed during repeat play, play is
interrupted and repeat play is
releasen
CAUTION
Some disks that do not conform to IEC standards
cannot be operated by repeat play.
Proceed as follows when playing a 25 cm disk, a disk that does not conform to IEC standards or a transparent or
semi-transparent colored record, or when starting play with an inside track on the disk.
Perform steps 1 through 4 in
1-4
"For automatic play" on the
previous page.
Depress the SPEED select
switch) and make the speed
indicator light with the disk
speed.
Depress the UP/DOWN swi-
tch @). The tonearm (4 now
rises.
Move the tonearm(4 by hand
to the desired starting posi-
tion.
UP/DOWN
[=
START/CUT
Depress the UP/DOWN swi-
tch @ again. The tonearm
descends onto the disk and
play begins.
When playing a disk which
does not conform to IEC stan-
dard, the tonearm (4 may not
return to the rest position. In
this case, push the START/
CUT switch(0.
Ena