Publicidad
Idiomas disponibles
Idiomas disponibles
Introduction
Before starting...
Download the application "Energeeks 3.0" on your mobile phone; it is
available on Google Play and APP Store. For the Wifi connection, the
camera only supports the 2,4Ghzhz frequency, (it does not support
5Ghz), it is necessary to connect the installed phone to the 2,4Ghz
network (only during the installation process), once the camera is
installed you can reuse 5Ghz.
Installation
Make sure the indicator light on the plug is flashing blue rapidly. If it
flashes blue or red slowly, press and hold the power switch on the
smart plug for a few seconds until the indicator light rapidly flashes
blue.
Bluetooth installation
Now activate the Bluetooth connection of your phone to detect the
plug automatically.
In the app, press the "+" button in the upper right corner and click "Add
device" and the plug will be detected automatically. On the screen
that appears, click on 'Go to add'. The app will recognize the Wi-Fi to
which your phone is connected and that it must be the one you want
to connect the plug to. Remember that the network must be 2.4Ghz,
it cannot be a 5Ghz network or a dual network.
Enter the wifi password and press next, the plug will connect
automatically.
18
Publicidad
