Publicidad
Idiomas disponibles
Idiomas disponibles
• Place the water tank back into position.
NOTE: Your appliance was designed to operate using pure
demineralized water.
Tips: Check fabric labels for recommendations.
• We recommend that you test acrylic, nylon or other synthetic fabrics
in an inconspicuous area to ensure these fabrics are not damaged by
hot steam.
ATTENTION: As steam is very hot, never attempt to remove
creases from a garment while it is being worn, always hang
garments on a clothes hanger.
1. Hang your garment on a clothes hanger.
2. Plug-in the appliance and push the power button. The power LED
should begin flashing. The appliance will heat up for 30s, at which
point the power LED will stop flashing.
3. You can use the brush accessory to better expose the threads of the
fabrics to the steam. You can also try the lint brush.
Note: Before removing or attaching the steam brush, unplug your
appliance and allow it to cool down.
4. Push the power button again to choose the steam level, then press
the steam push button with the nozzle pointing away from you, and
the appliance in a vertical position. For optimal use, pass the steam
jets over your garment from top to bottom.
5. After use, unplug the appliance.
6. Remove the water tank, empty the water tank completely, then place
the water tank back into position.
10
AF MANUAL ESCOVA DE ENGOMAR A VAPOR BSB5229 BECKEN A5.indd 10
AF MANUAL ESCOVA DE ENGOMAR A VAPOR BSB5229 BECKEN A5.indd 10
08/07/2021 10:21
08/07/2021 10:21
Publicidad
