Becken BTF3331 Manual De Instrucciones página 10

• To adjust the air column speed, press the button in the control panel
repeatedly, which allows you to switch between the LOW, MEDIUM
and HIGH settings.
• The air column has an oscillating function. Press the button in
the control panel so the air column starts to oscillate. To stop the
oscillating function, press the button again.
• The air column has a Timer function. Using this function switches off
the fan at the end of the programmed time. The programmed time
can vary between 0.5 hours and 7.5 hours. To programme the time,
press button in
selected will be displayed on the pilot light corresponding to the
selected time. To disable the timer function, press the button
the corresponding indicator switches off.
• The fan has a NATURAL mode. This mode allows to switch between
the minimum and maximum speed of the fan. To select this mode,
press the button in the control panel until the corresponding pilot
light appears.
• A fan has a NIGHT mode. This mode keeps a lower air flow, which in
turn lowers the fan noise. To select this mode, press the button in the
control panel until the corresponding pilot light appears.
• When you no longer want to use the fan, press the button
control panel to switch it off, and remove the plug from the socket.
10
AF Manual COLUNA AR A5 EN.indd 10
the control panel repeatedly. The number of hours
until
in the
05/04/17 12:09