Publicidad
Idiomas disponibles
Idiomas disponibles
c. Insert the Bolt (#31) through a Long Connecting Tube (#8), a Tube Washer (#23), the Upper
Handle Bar (#6), the other Tube Washer (#23) and the other Long Connecting Tube (#8)
in
order. Then tighten the nut to lock them.
d. Secure Top Pole (#3) to Middle Pole (#2) with 2 sets of Bolts, Washers and Nuts (#25).
STEP 13
Rotate the rocker lever (#32) to align the holes of the Lower Handle Bar (#5) and the Mounting
Plate (#20). Then attach them with a set of Bolt, Washer, and Nut (#14).
2
Publicidad
