Descargar Imprimir esta página

Craftsman 917.28803 Manual De Instrucciones página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

CHECKTIREPRESSURE
The tires on your tractor were overinflated at
the factory for shipping purposes.
Correct
tire pressure
is important
for best cutting
performance.
• Reduce tire pressure
to PSI shown on
tires.
CHECK DECK LEVELNESS
For
best
cutting
results,
mower
housing
should
be properly
leveled.
See "TO LEVEL
MOWER
HOUSING"
in the
Service
and
Adjustments
section
of this manual.
CHECK FOR PROPER POSITION
OF ALL BELTS
See the figures
that are shown
for replac-
ing motion
and mower
blade
drive
belts
in
the Service
and Adjustments
section
of this
manual.
Verify
that
the
belts
are
routed
correctly.
CHECK BRAKE
SYSTEM
After you learn how to operate
your tractor,
check
to see
that
the
brake
is operating
properly.
See "TO CHECK
BRAKE"
in the
Service
and
Adjustments
section
of this
manual.
_CHECKLIST
Before
you operate
and enjoy your new
tractor, we wish to assure that you receive
the best performance
and satisfaction
from
this Quality Product.
Please review the following checklist:
_/'AII assembly instructions have been com-
pleted.
_iNo remaining
loose parts in carton.
*/'Battery
is
properly
prepared
and
charged.
_/Seat is adjusted comfortably
and
tightened
securely.
_/AII tires are properly inflated.
(For ship-
ping purposes, the tires were overinflated
at the factory).
_/Be sure mower deck is properly leveled
side-to-side/front-to-rear
for best cutting
results.
(Tires must be properly inflated
for leveling).
_/Check
mower and drive belts.
Be sure
they are routed properly around pulleys
and inside all belt keepers.
_/Check
wiring.
See that all connections
are still secure and wires
are properly
clamped.
While learning how to use your tractor, pay
extra attention
to the following
important
items:
_/'Engine oil is at proper level.
_/Fuel tank is filled with fresh, clean, regular
unleaded gasoline.
,/Become
familiar
with all controls
- their
location and function. Operate them before
you start the engine.
_'Be sure brake system is in safe operating
condition.
_/Be sure Operator
Presence System and
Reverse
Operation
System
(ROS) are
working properly (See the Operation and
Maintenance
sections in this manual).
10

Publicidad

loading