Conrad WS9129 Manual página 10

13 – °C/°F button
14 – DOWN button
15 – Hanging hole
16 – Battery compartment cover
17 – Stand
Getting started

Open the battery compartment cover.

Insert 2 x AAA Micro LR03 batteries
following the correct polarity (+/- markings).
The measured temperature and humidity
appear on the display.

Close the battery compartment cover
again.
Positioning

Use the stand feet for table standing
positioning.

Use the hanging hole with an nail or an
hook for wall mounting positioning

Use the included Velcro strips to attach the
back of the unit to surfaces that don't allow
for classic wall mounting. Remove the
protection paper and stick adhesive side of
the Velcro strips to the desired surface and
to the back of the unit.
Temperature display
Press the °C/°F button to change between °C
EN2