Craftsman 917.377522 Manual De Instrucciones página 4

when this
lawn mower was produced, They are also
available at nlost Sears retail outlets and service centers, Most Sears stores can also order
repair parts for you r when you provide the model number of your lawn mower. Some of these
accessories may not apply to your lawn mower.
LAWN MOWER PERFORMANCE
'-'- \
cuPPz.Q DEFLECTOR
FOR,,REAR DISC,ARGE LAwN MOWERS
GRASSCATCHERS
FOR
REARDISCHARGE
LAWN MOWERS
L_ i,,
LAWN MOWER MAINTENANCE
MULCHER KiTS
GRASS CATCHERS
FOR
SIDE DISCHARGE
LAWN MOWERS
MUFFLERS
BELTS BLADES
AIR FILTERS
BLADE ADAPTERS WHEELS
STAeIL,fZr'R
GAS CANS
SPARK PLUG8
ENGINE OiL
Read these instructionsand this manual in its
entirety before you _,ttempt to assemble or
operate your new lawn mower. Your new lawn
mower has been assembled at the factory with
the exception of those parts left unassembled
for shipping purposes. Aft parts such as nuts,
washers, bolts, etc,, necessary to complete the
assembly have _en placed in the parts beg,
To ensure safe and proper operat!0n of your
lawn mower, a_lparts and hardware you
assemble must be tightened securely. Use the
correct tools as necessary to ensure proper
tightness.
TO REMOVE LAWN MOWER FROM
CARTON
• Remove loose parts included wP, h mower,
• Cut down two end comers of carton and lay
end panel down flaL
• Remove all packing materials except
padding between upper and lower handle
and padding holding operator presence
control bar to upper handie°
• Rt_tl lawn mowerout of carton and check
carton thoroughly fopadditional looseparts.
HOW TO SET UP YOUR LAWN
MOWER
TO UNFOLD HANDLE
IMPORTANT: Unfold handles carefullysOas
not to pinch Ordamage controlcables
• Raise handles until lower handlesection
locks intoplace in mowing position,
• Remove protective padding, raiseut_per
handle section intoplaceonlowerhandle
and tighten both handle knobs. '
• Remove handle padding holding operator
presence control bar to upper handle,
• Your lawnmower handle can be adjusted
foryourmowingcomfort. Refer to "Adjust
Handle" in the Service and Adjustment
sec_onof this manual,
4