Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning and Maintenance
Disassembl
2. Unscrew the gland of the roller brush according to the instructions, draw the
roller brush assembly to one side and clean it. Mount it back according to the
disassembly procedure after cleaning.
Release the gland of the
roller brush
Disassembl
Note
1. When dust blocks the air duct of the bed brush, please use disposable
chopsticks to remove the dust.
3. During operation, do not touch the roller brush that rolls at the bottom.
and maintain the roller brush when it is entangled or dirty.
1. Press the button to remove the
Press
3. Wipe the inside clean with a cloth strip. If the roller brush is wrapped with hair,
cut it along the roller brush with scissors and clean it up. After cleaning, mount the
roller brush back according to the above disassembly steps.
and cleaning of electric scrubbing brush
Press
and cleaning of electric scrubbing brush
Draw out the roller brush
assembly
2. Pull the lock in the direction shown
below, and then rotate to take out the
25
Publicidad
