Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

PW40SOH QUICK SETUP GUIDE
WARNING Failure to read and follow the operator's manual and all operating instructions could result in death, serious
injury, and/or property damage.
WARNING Fuel and its vapors are extremely flammable and explosive which could cause burns, fire or explosion resulting
in death or serious injury. Turn pressure washer engine OFF and let it cool at least 2 minutes before removing fuel cap. Let
spilled fuel evaporate before starting engine. Always allow space for fuel expansion.
WARNING Starter cord kickback (rapid retraction) will pull hand and arm toward engine faster than you can let go which
could cause broken bones, fractures, bruises, or sprains resulting in serious injury. NEVER pull starter cord without first
relieving spray gun pressure. Pull starter cord slowly until resistance is felt, then pull rapidly. Firmly grasp spray gun with
both hands when using high pressure spray to avoid injury when spray gun kicks back.
WARNING Engine exhaust contains carbon monoxide, a poisonous gas that could kill you in minutes. You CANNOT smell
it, see it, or taste it. Operate ONLY outside far away from windows, doors and vents. Install carbon monoxide alarms. DO
NOT run this product inside homes or garages, even if using fans or opening doors and windows.
WARNING High water pressure could cut through skin resulting in serious injury. Spray gun traps high water pressure,
even when engine is stopped and water is disconnected. NEVER aim spray gun at people, animals, or plants. ALWAYS
point spray gun in safe direction, press red button and squeeze spray gun trigger to release high pressure, every time you
stop engine.
WARNING Risk of eye injury. Spray could splash back or propel objects resulting in serious injury. Always wear indirect
vented (chemical splash) safety goggles marked to comply with ANSI Z87.1 when using or in vicinity of this equipment.
NEVER substitute safety glasses or dry-condition goggles for indirect vented safety goggles.
Items Included: Operator's Manual (not shown)
You will need (not included):
Utility knife
• Unleaded fuel
UNPACK PRESSURE WASHER
1. Remove everything from carton except pressure washer.
2. Open carton completely by cutting each corner from top to bottom.
3. Ensure you have all included items prior to assembly. If items are damaged or missing, call 1-800-776-7690.
4. Prior to assembly, lubricate all o-ring connections as described in operators manual.
Part No 210506
All manuals and user guides at all-guides.com
• Garden hose, 50 ft. (15m) or less
1
Have Questions?
Do not return to store. We can help. Call
Customer Service Toll-Free 1-800-776-7690
Or visit our website www.billygoat.com
• Safety goggles (indirect vented type)
Form No F120115A

Publicidad

loading

Resumen de contenidos para Billy Goat PW40SOH

  • Página 1 Do not return to store. We can help. Call Customer Service Toll-Free 1-800-776-7690 PW40SOH QUICK SETUP GUIDE Or visit our website www.billygoat.com WARNING Failure to read and follow the operator’s manual and all operating instructions could result in death, serious injury, and/or property damage.
  • Página 2 All manuals and user guides at all-guides.com PW40SOH QUICK SETUP GUIDE ASSEMBLE PRESSURE WASHER 1. Place handle (A) onto handle supports (B) connected to main unit. Make sure holes (C) in handle align with holes (C) on handle supports. (See Fig. 1) NOTE: It may be necessary to move the handle supports from side to side in order to align the handle so it will slide over the handle supports.
  • Página 3 All manuals and user guides at all-guides.com PW40SOH QUICK SETUP GUIDE CONNECT WATER SUPPLY 1. Inspect garden hose inlet screen (K) for damage. (See Fig. 8) NOTE: If inlet screen is damaged or missing, DO NOT use pressure washer, call 1- 800-770-7690.
  • Página 4 All manuals and user guides at all-guides.com PW40SOH QUICK SETUP GUIDE STOP PRESSURE WASHER 1. Release spray gun trigger and let engine idle for two minutes. 2. Move throttle lever (T) to SLOW position, then STOP position. (See Fig. 13) 3.
  • Página 5 No vuelva a la tienda. Podemos ayudarle. Llame gratuitamente al departamento de servicio al cliente, 1- PW40SOH QUICK SETUP GUIDE 800-770-7690 o visite nuestro sitio web, www.billygoat.com ADVERTENCIA Si no se leen y siguen las indicaciones del manual del operario y todas las instrucciones de uso, se pueden producir daños materiales, lesiones graves o incluso la muerte.
  • Página 6 All manuals and user guides at all-guides.com PW40SOH QUICK SETUP GUIDE MONTAJE DE LA LIMPIADORA A PRESIÓN 1. Coloque el asa (A) sobre los soportes del mismo (B) que ya están adheridos a la unidad principal. Asegúrese de que los orificios (C) en el asa estén alineados con los orificios (C) en los soportes del mismo asa.
  • Página 7 All manuals and user guides at all-guides.com PW40SOH QUICK SETUP GUIDE CONEXIÓN DE LA ALIMENTACIÓN DE AGUA 1. Examine el filtro de entrada de la manguera de jardín (K) para determinar si presenta daños. (See Fig. 8) AVISO NO utilice la limpiadora a presión si el filtro de entrada está dañado o falta.
  • Página 8 All manuals and user guides at all-guides.com PW40SOH QUICK SETUP GUIDE 10. Cuando arranque el motor, usted misma en la posición que se muestra. Sujete la manija y hale ligeramente la manija del arranque hasta que sienta cierta resistencia. Después hálela rápidamente. (See Fig. 16) 11.