Publicidad
Idiomas disponibles
Idiomas disponibles
_Mechanicai
control
model
MODE
The mode knob controls fan speeds and cooling
speeds. To set desired cooling temperature,
simply
rotate the mode knob dial to the appropriate
setting. See Fig. 9.
THERMOSTAT
The thermostat
automatically
controls the cooling
cycle (compressor)
of the air conditioner
to maintain
room temperature.
However, the fan motor will
continue to operate after the compressor
(cooling
cycle) is completed.
See Fig.9.
LOW FAN will circulate the air at a minimum speed
without cooling.
HIGH FAN will circulate the air at a maximum speed
without cooling.
LOW COOL provides cooling, automatically
with
minimum air circulation.
Recommended
for night-
time use.
HIGH COOL provides cooling, automatically
with
quick cooling or for extremely hot days. Once room
is cooled, reduce setting to LOW COOL.
OFF will completely
shut-off the unit.
NOTE: After setting the mode, allow 3
minutes before switching to another mode.
Thermostat
knol_
OFF
Mode knob
Fig.9
When using FAN control, turn slowly allowing
unit
to adjust.
When using THERMOSTAT,
be sure to allow three
minutes
before changing
temperature.
Adjusting
too quickly
may cause an overload
resulting
in a
blown fuse.
Publicidad
