Introduction; Features; Product Description; Front Panel - Phonic MK15 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INTRODUCTION

congratulations on your purchase of the MK15 or MK50 keyboard
amplifier. We have little doubt that this amp will provide you the
reliability and stability you need. Whether it is for gigs or simply
jamming alone, the MK15 and MK50 are quality amps that will
no doubt perform beyond your expectations. This manual was
specifically written to give an overview of the amplifier's use and
features, as well provide information on how to prolong the unit's
life. We recommend users read the manual thoroughly before
storing it for future reference.

FEATURES

● 8 " o r 12" custom woofer and tweeter
● 2 x 1/4" inputs with level controls
● cd input
● Headphone jack
● External speaker jack
● 4-band EQ
● High-quality woofer and tweeters
● Adjustable cabinet design for traditional, vertical, or studio
monitor positioning
● Steel grille protect components
MK50 Additions:
● Insert effects jack
● Internal limiter
● Peak LEd
● Master volume control
● Reverb
4
1
2

PRODUCT DESCRIPTION

Front Panel

1. Input 1 Connector
This jack can be used to connect your keyboard or other line-level
device to the amp using a high-quality shielded instrument cable.
Use the Level 1 knob to control the signal level of this input.
2. Input 2 Connector
This jack can be used to connect your keyboard or other line-level
device to the amp using a high-quality shielded instrument cable.
Use the Level 2 knob to control the signal level of this input.
3. Level 1 Control
This control can be used to adjust the level of the signal received
through Input 1.
4. Level 2 Control
This control can be used to adjust the level of the signal received
through Input 2.
5. Peak (MK50 only)
The Peak LEd will illuminate when the input signal nears clipping.
For best results, adjust the 2 level controls so as to allow this LEd
to flash on high signal peaks only. The peak LED can be found
on the MK50 only.
6. Low Control
This control is used to adjust the low frequency (bass) level of
the amplifier. Rotate the control clockwise to increase the low
frequency output, rotate counter-clockwise to decrease.
3
4
5
6
MK15 / MK50

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mk50

Tabla de contenido