Honiture G20 Pro Manual Del Usuario página 14

Clean the dust box
1. After the machine is used for a long time, remove the filter gauze and HEPA filter.
2. Put the removed prefilter and dust box under the faucet for washing (the HEPA filter cannot be washed by water).
3. Remove the water droplets, and dry the filter and dust box thoroughly before use.Press the switch of the dust box,
open the dust box, and dump.
Handle
Dust Bin Open
Button
Pre-filter
Note:
• Use clean water for washing, and do not add any detergent.
• Do not use a brush or fingers to clean the filter.
• Dry the filters thoroughly for at least 24 hours.
• It is recommended that you replace a set of filters every 3 months.
UK: AfterserviceUK@honiture.com / US&CA: support02@honiture.com
EN If you have any questions please email to
24
Sponge
HEPA Filter
Filter Cover
Clean the infrared anti-collision sensor (Recommended cleaning frequency: monthly)
Clean the cliff sensor (Recommended cleaning frequency: monthly)
UK: AfterserviceUK@honiture.com / US&CA: support02@honiture.com
If you have any questions please email to
25 EN