Craftsman 320.39589 Manual Del Operador página 12

,&
,d_ WARNING: To prevent accidental starting that could cause serious personal
injury, always disconnect the sander from the power source when assembling
parts, making adjustments, installing or removing sandpaper, cleaning, or when
it is not in use.
TURNING THE SANDER ON/OFF (Fig. 2)
To turn on the sander, connect the plug to an electrical outlet, and depress the
on/off trigger switch.
To turn it off, release the trigger switch.
LOCK-ON BUTTON (Fig. 2)
The lock-on button allows the
operator to keep the sheet sander
running without continuously
depressing the trigger switch.
To engage the lock-on function:
depress and hold the trigger
switch, depress the lock-on button,
and then release both.
To release the lock-on button,
depress and then release the
trigger switch.
LED WORKLIGNT (Fig. 3}
The LED worklight, located in
the front of the tool, will turn on
when the on/off trigger switch
is depressed. This provides
additional lighting on the surface
of the workpiece for operation.
The LED worklight will turn off
when the switch is released.
Fig. 2
Lock-on button
__ sOwn_Ochgg
Fig. 3
LED
worklight
12