EN
This manual contains important information that should be kept
for future reference.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking hazard.
Materials
Mod. A:
Cover (Copparo): 100% polyester.
Mod. B:
Cover (Velvet): 100% polyester.
Mod. C:
Cover (Melina): 85% polyester, 15% acrylic.
Mod. D:
Cover (Bormio): 100% polyester.
Mod. E:
Cover (Alba): 100% polyester.
Mod. F:
Cover (Bellagio): 51% cotton, 28% viscose, 7% linen, 7% polyester,
6% acrylic, 1% polyamide.
Mod. G:
Cover(Lucca): 59% polyester, 17% cotton, 16% viscose, 8% linen.
Mod. H:
Cover (Venezia): 62% polyester, 17% cotton, 14% viscose, 7% linen.
Top layer of seats: 15% duck feathers, 15% goose feathers and 70%
HR polyurethane foam 25-30 kg/m
Padding of seat: polyurethane foam 30 kg/m
Padding of back cushions: 15% duck feathers, 15% goose feathers
and 70% HR polyurethane foam 25-30 kg/m
Seat structure: plywood and solid pine.
Backrest and armrests structure: plywood, particle board,
hardboard.
Backrest suspensions: rubber belts.
Seat suspensions: NOZAG springs.
Feet: polypropylene.
Assembly Instructions
Before beginning assembly, identify all components using the
manual.
In order not to lose components, do not throw the package before
completing the full assembly.
This product must be assembled by an adult.
Plan to assemble the furniture as near as possible to where you
want to install.
Assemble on a clean, flat surface.
Recommendations for use
This product was designed for indoor use only.
Do not stand on the product.
Do not sit on the armrests and backrest.
Beware of sharp objects.
Danger of pinching/jamming during the assembly of the different
parts of the sofa.
Cagliari - 05/2023
.
3
.
3
.
3
Maintenance
BC
Avoid direct and prolonged exposure of the product to
solar radiation: the colors may fade.
Do not place the product near a heat source (radiator, fireplace,
etc.) or a source of humidity. Heat and humidity can damage the
product.
Turn and pat the seats, back cushions and armrests regularly so
they don't wear out and get unevenly dirty.
Do not use any abrasive product.
Fabric coating
Vacuum or brush upholstery once a week: dust accumulation
accelerates wear and tear
and color fading.
Soak up spilled liquids immediately with a clean, dry cloth, dabbing
to absorb the liquid. Do not rub, this may damage the fabric.
Variations in color between cleaned and uncleaned surfaces may
appear.
If in doubt, contact a professional to carry out cleaning.
Keep the label with lot number, it may be useful in case of complain.
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat-design.
com or write to this address: HABITAT, 70 AVENUE VICTOR HUGO,
93300 AUBERVILLIERS FRANCE.
The packaging elements are to be sorted out according to local
requirements. Make the right sorting choice and give them a
second life!
By sorting out this manual you contribute in preserving
the environment. This manual can still be found on
www.habitat-design.com.
2