PARSONVER SPROD1 Manual Del Usuario página 2

Download App
Power on - Click to select
the language - Scan the QR
code of the watch - Download
"Fitomo" app
For iOS: Apple App Store
For Android: Google Play Store
Pair with Watch
Press and hold the right
button to turn on the
watch.
Note: For first use, please
charge the watch for 5
minutes, otherwise it cannot
be turned on, and it takes
about 2 hours to fully charge
the watch.
1.Open the app, register and log
in to your account.
2.Click the third small icon "Me"
at the bottom of the page -
Click "No Device Added" - "Click
to scan the QR code" - Scan the
QR code on the watch (Setting
- QR code) - "Agree to the
phone pairing request?" pops up
on the watch, select "√" - Click
"Pair" in the Bluetooth pairing
request that pops up on the
phone - to achieve a successful
connection(PARSONVER SR1)
2
Note:
1)Turn on the Bluetooth on the mobile phone.
2)Reset the watch when no Bluetooth signal found.
3)Need to enter the app to pair with watch, cannot connect to
the Bluetooth in the phone settings.
4)When the Bluetooth is successfully connected, the main
interface pulls down and the sign in the upper
left corner is , if there is no connection, the sign in the
upper left corner is .
Basic Operation
1.Swipe Down to access quick settings.
Setting mode
Brightness adjustment
Turn on/off"raise to wake"
Do not disturb mode
Power saving mode
Turn on/off call audio function
2.Swipe Up to enter messages interface.
3.Swipe Right to enter menu interface.
4.Swipe Left to enter data, heart rate, blood oxygen, sleep,
weather, music interface.
5.Press and hold the main interface to select the screen dial.
6.Press and hold the right button for about 3s to shut down.
7.Swipe Right on the interface to exit the current function
interface.
3