Puffco Peak pro Manual De Instrucciones página 5

CLEANING: 3D CHAMBER
Allow chamber to cool completely before handling.
Isopropyl alcohol is highly flammable; allow
chamber to air-dry completely before reattaching.
1. Remove the Joystick
2.
3. Submerge the chamber
CLEANING: GLASS
1. Carefully remove glass
2. Once removed, submerge
3. After soaking, thoroughly
X
X - Avoid allowing water into
8
with Jacket & Tether, then
unscrew the 3D Chamber
from base.
Use a cotton swab to
gently remove any residue
with 90%+ isopropyl alcohol.
in 90%+ isopropyl alcohol
for 20 minutes. Air-dry
completely before
reattaching. DO NOT rinse.
from base.
glass in 90%+ isopropyl
alcohol for 20 minutes.
rinse glass with water
and let air-dry completely
before reattaching to base.
lower section.
CLEANING: BASE
1. Remove glass and
2. Use a cotton swab soaked
3. Allow to air-dry completely
Visit Puffco.com/support
for how-to videos and helpful tips.
chamber from base.
in 90%+ isopropyl alcohol
to gently clean the gold
contact points and airpath
between the chamber
and glass.
before reattaching
components. DO NOT rinse.
Do not allow water into
the base at any time.
9