My Arcade GO GAMER PORTABLE Guía De Usuario página 5

to illuminate the device LEDs.
2
.
The main screen will display.
3
.
Use the D-pad arrows to select a game.
NOTE:
All directions of the D-pad can be used to help select a
game.
4
.
Press the A button to play the game.
5
.
To return to the main menu to play a new game press and
release the reset button.
NOTE:
The Go Gamer has an AUX OUT port on the bottom of the
device for use with headsets that have a 3.5mm
auxiliary connector.
The Go Gamer has a low battery indicator that appears on the
top of the screen when the batteries run low. Change the
batteries of your Go Gamer when you see the battery symbol.
Setting up gour Go Gamer with a television
1. With a 2.5mm to AV cable (not included), plug the 2.5mm
end of the cable into the port on the bottom of the Go Gamer
labeled "AV OUT".
2
.
Locate the audio (white) and video (yellow) inputs on
your television.
3
.
Plug the video (yellow) side of the AV cable into your
television's video input.
4
.
Plug the audio (white) side of the AV cable into your
television's audio input.
5
.
Confirm your video display is set to the proper video input.
For example, if you plug the Go Gamer into your television's
input 2 port, switch your television to the same input 2.
6. Move the switch located on the top of the system from