Melchioni Family SLIMMY Manual De Instrucciones página 10

TO START WEIGHING
WEIGHING MODE
A.
Place the scale on a solid and flat surface.
B.
Place bowl (if used) on the scale.
C.
Gently press on the scale by hand to turn on.
D.
Wait until LCD shows "0". Press MODE button to convert to weighing mode.
E.
Load weighing object on scale (or bowl) to start weighing. LCD will show the weight reading.
F.
If the weighing object is wather or milk, press MODE button to choose volume mode and view the volume of
weighing object.
"ZERO" OR "TARA" FUNCTION
To weight different loads consecutively without removing loads from scale. Put first Load on the scale, get weight
reading. Press ZERO button to reset the LCD reading to "0" before adding newt load. You can repeat this operation.
VOLUME INDICATION MODE
A. Place the scale on a solid and flat surface.
B. Gently press on the scale by hand to turn on.
C. Wait until LDC shows "0" and press MODE
button to choose "water" or "milk"
mode.
D. Put a liquid container onto the scale
platform. LCD shows weight of
container.
E. Press ZERO button to zero or tare weight.
F. Put liquid (water or milk) into the
container, LCD shows the volume or
the liquid.
G. Press MODE button to choose "Weight"
mode and view the weight of liquid.
9