Publicidad
Idiomas disponibles
Idiomas disponibles
6
7. GENERAL DESCRIPTION
Lifting armchairs, designed for rest and relaxation. The backrest and seat have padding with differing
densities, designed specifically to maintain correct posture. Painted steel structure, Polyester fabric.
The armchairs have two independent motors that allow the backrest and the footrest to be inclined
separately, thus allowing several positions to be obtained, including the best one for reading or
watching television, relaxing and/or digestion. The armchairs also have a stand-up function, thanks to
the motor that allows the person to be lifted. With this lifting device, the seated person is accompanied
to an almost fully erect position, thus making it easier for them to stand up. The various backrest and
footrest positions are adjusted using a practical and easy-to-use remote control with four buttons.
7.1 View and parts list
3
5
2
6
4
7
8. ASSEMBLY
8.1 Assembly for every model except Chloe armchair PO403-xx
After removing the packaging, check that all the armchair components are intact and that there are
no visibly damaged parts. In the case of damage, do not use the product and contact your retailer. For
the connection to the mains electricity, connect the cable with plug on the armchair to the socket. Do
not rest any object on the power cable or step on it.
8.2 Assembling of PO403-xx
The PO403 armchair is shipped with and backrest to be assembled (Fig.1)
1. Remove the support guard on which the armchair back will be housed (Fig.2)
2. Check that the support on which the backrest on the back side of the chair will be housed is facing
outward (Fig. 3)
3. Insert the backrest by matching the 2 joints until the slide is complete. (Fig.4)
4. To disassemble the ears, it will be sufficient to simply slide them off the support rail. For the
backrest, it is necessary to have a screwdriver to facilitate release from the interlocking support
placed on the chair. Fig.5)
Fig.1
Fig.2
1. Armchair
2. Front wheels or roller system
1
3. Reclining backrest
4. Storage pocket
5. Remote control
6. Two motors for independent movements
7. Electrical cable
Image only for illustrative purpose
2
Fig.3
Fig.4
Fig. 5
Publicidad
