Publicidad
Idiomas disponibles
Idiomas disponibles
Model: 6000
Use four (4)
[AA]
bolts and four (4)
STEP 14
attach one (1) roof top rib assembly to the left and right cross beam
assemblies�
Repeat with the other two (2) roof top rib assemblies�
[AA]
× 12
[FF]
× 12
Use four (4)
[dd]
bolts and four
STEP 16
one (1) side panel 3 {
} to the outer posts�
J3
Repeat with the other {
} side panel�
J3
[dd]
× 8
[FF]
× 8
J3
BLACKSTONEPRODUCTS.COM/SUPPORT
[FF]
flat washers to
[FF]
flat washers to attach
J3
ASSEMBLY GUIDE
Use four (4) bolts and four (4)
STEP 15
(1) side panel 2 {
} to the rear cross beam assemblies�
J2
Repeat with the other three (3) {
assemblies�
[AA]
× 16
J2
[FF]
× 16
J2
J2
J2
Note: For steps 17-25, the assembler can choose to assemble
STEP 17
the shelves and extended table to either the left or right side of the
BLACKSTONE BAR & GRILL�
Note: do NoT tighten the bolts
completely until STEP 19 is
complete� Refer to the INSIde
and UP label�
Use four (4)
[BB]
bolts and two
(2)
[FF]
flat washers to attach
one (1) shelf brace 1 {
} to your
l1
preferred {
} side panel�
J3
Repeat with the other {
}
l1
shelf brace�
[BB]
× 8
[FF]
× 8
| OWNER'S MANUAL
[FF]
flat washers to attach one
} side panels and rear cross beam
J2
optional left side
optional left side
installation
installation
L1
L1
optional right side
optional right side
installation
installation
07
Publicidad
