Blackstone 2321 Manual Del Propietário página 6

OWNER'S MANUAL | ASSEMBLY GUIDE
Set the griddle on its feet� Place the griddle top and hood on
STEP 02
the griddle body by aligning the four (4) pins to the holes of the body�
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
Make sure the front pins are
seated in the holes, then push
the griddle top back�
❶ ❶ Place the two front pins into
the front locking holes and push
the griddle top back�
❷ ❷ Then, set the two rear pins
Install the two (2) control knobs by pushing them into place
STEP 04
in the oFF position�
into the rear holes�
06
Use the two (2) M6x16 screws pre-installed in the hood
STEP 03
handle to attach the hood handle grommets and the hood handle to
the front of the hood�
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
Make sure the front pins are
seated in the holes, then push
the griddle top back�
❶ ❶ Place the two front pins into
the front locking holes and push
the griddle top back�
❷ ❷ Then, set the two rear pins
Hang the grease cup in the slot on the back of the
STEP 05
griddle body�
into the rear holes�
ModelS: 2321 • 2321CA
BLACKSTONEPRODUCTS.COM/SUPPORT