Campbell Hausfeld CL158100 Manual De Instrucciones De Operación

Operating Instructions
Needle Scaler
MODELS: CL158100, CL158200
Description
Needle scalers are designed to remove rust, paint, weld slag, or dirt from metal
surfaces.
Unpacking
After unpacking the unit, inspect carefully for any damage that may have occurred
during transit.
READ & FOLLOW ALL INSTRUCTIONS
Safety Guidelines
This manual contains information that is very important to know and understand. This
information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To
help recognize this information, observe the following symbols.
Danger indicates an imminently hazardous situation which, if
not avoided, WILL result in death or serious injury.
Warning indicates a potentially hazardous situation which, if not
avoided, COULD result in death or serious injury.
Caution indicates a potentially hazardous situation which, if not
avoided, MAY result in minor or moderate injury.
Notice indicates important information, that if not followed, may
cause damage to equipment.
NOTE: Information that requires special attention.
CALIFORNIA PROPOSITION 65
This product or
its power cord may contain chemicals, including lead, known to
the State of California to cause cancer and birth defects or other reproductive harm.
Wash hands after handling.
You can create dust when you cut, sand, drill or grind
materials such as wood, paint, metal, concrete,
cement, or other masonry. This dust often contains chemicals known to
cause cancer, birth defects, or other reproductive harm. Wear protective
gear.
© 2012 Campbell Hausfeld/Scott Fetzer
For parts, product & service information visit
SAVE THESE INSTRUCTIONS
DO NOT DISCARD
www.campbellhausfeld.com
IN742900AV 10/12