Publicidad
Idiomas disponibles
Idiomas disponibles
CHILDREN'S ELECTRIC MOTORCYCLE
OPERATION INSTRUCTIONS
Model KB-801
You are welcome to choose children's electric motorcycle produced by our factory. Please read this
instruction carefully before operation and correctly operate this product in accordance with the
instruction. Please always keep this operation instructions properly for reference in the future.
Main Technical Specifications:
! Sealed dry type battery 6V/4.0AH
! Suitable age: children of 3-7 years old
! Maximum loading capacity: 30Kgs
! Speed: 3KM/HR
! Motorcycle size after assembling : 78*38*56cm
! (For charger) Input: AC220V/50-60Hz; Output: DC 6V/500mA
! The duration of battery: The motorcycle can go continuously for 2 hours after fully charging the
battery for 10-12 hours.
Operation and Function
! Stepping on the pedal (shown in picture 8), the motorcycle will move. And it will stop when we
release the pedal.
! Forward/Backward switch: press the switch forward , the motorcycle will go forward. otherwise it will
go backward. The front light and back light will shine when the motorcycle is moving.
! When we press down the phone button, alarm signal will sound.
! For alarm light, we need to use 2 pcs 1.5V alkalescent battery (AAA) installed in the rear toy box.
List of parts packed:
! One set of front wheel parts includes one wheel, one iron bar, two iron buckles, one front fender and
two covers for front wheel.
! One fitting bag includes one panel, one operation instructions, one headlight, two fix buckles, one
windshield, one set of screws.
! One set of body with charger and battery.
! One set of head parts of motorcycle.
! One set of rear toy box.
! One seat
ASSEMBLE PICTURE FOR TYPE KB-801 BABY CAR
1. The headlight links with car
head part. (Picture 1)
2. Put the wind shield and front
fork together (Picture 2)
3. Assemble the wheel together
with the front fork.(Picture 3)
4. Assemble the head parts and
body together. (Picture 4)
5. Use one screw to fix the box
stand at the back of the motor
body. (Picture 5)
6. Assemble the cushion on the
motor body.(Picture 6)
7. Put the box on the box stand,
the fix the box with three
screws (Picture 7)
Pagina 1
Publicidad
