Publicidad
CLEANING
GRILL REMOVAL (Screwdriver required)
1. Power off and unplug unit.
2. Remove 6 screws located at the 12, 2, 4, 6, 8, 10 o'clock positions on the back of
the fan head.
3. Remove front grill.
4. Dust or wash Front Grill with a mild dishwashing soap. Do not place grill in the
dishwasher. The excessive heat can distort the plastic.
BLADE REMOVAL
1. Power off and unplug unit.
2. Rotate blade nut clockwise until free.
3. Pull the blade straight out from the shaft.
4. Wipe the Blade with a damp cloth. If your fan is used in a greasy environment,
such as a kitchen, mild soap or a common household cleaner may be
necessary. Do not use solvents. Do not place blade in the dishwasher. The
excessive heat can distort the plastic.
To reattach blade and front grill, follow reverse of instructions above.
Note: The motor is permanently lubricated and requires no oiling.
12 English
RENSEIGNEMENTS
Votre produit comprend les éléments suivants:
1
Partie Principale du Ventilateur
2
Pieds latéraux (2)
3
Pied arrière (1) (pas montré)
4
Cordon d'alimentation
24 V c.c. et 1,0 A
5
Télécommande
(Modèle SPIN 12 uniquement)
4
SUR LE
PRODUIT
1
2
5
3
2
Français
37
Publicidad
