FITFIU APK2 Manual Del Usuario página 19

ASSEMBLY
1. Release the buckle.
2. Lay the table on its side with four rubber feet on the floor, open up the table with four legs extended as full
as possible.
3. Take out all accessories and then lift the table up until all the legs are on the floor.
4. Put the headrest cradle into the corresponding outlets.
5. Place the headrest cushion on the cradle.
6. Put on the hanged armrest or sling on the headrest cradle.
7. Insert the two side arm supports into the two holes at each side of the table.
8. The table is now ready for your use.
1
4
7
2
5
8
19
MASSAGE TABLE APK2
3
6
EN