FITFIU BIA0001M Manual Del Usuario página 9

BASKET BICYCLE BIA0001M
ASSEMBLY
STEP 1.
Insert the U-shaped support in the groove of the front fork.
STEP 2.
Insert the plate and the corresponding screws on the inside of the basket and then, make them coincide
with the front support located on the steering rod of the bike and attach them with the nuts.
STEP 3.
Place the flat plate support on the inside of the basket base using the screws and make them coincide
with the curved plate fixing after you have placed it on the front part of the support (the groove of the
plate must coincide with the U-shaped support). Attach both plates with the nuts.
EN
9