Installation (continued)
5
Installing the bulb
□
Install flood lamps. When screwing in the flood
lamps use the bulb socket rubber washer (DD),
do not overtighten.
□
Place the bulb socket rubber washer (DD) on the
base of the bulb (sold seperately).
□
Screw the bulb into the bulb holder.
Operation
Testing and adjustments
□
Turn on the circuit breaker and light switch.
□
To test the light during daylight, cover the
photocell (A) with black tape and ensure the light
works properly.
□
Uncover the photocell and your unit will operate
automatically – on at dusk, off at dawn.
7
Please contact 1-866-308-3976 for further assistance.
A
HOMEDEPOT.com
DD