Publicidad
Idiomas disponibles
Idiomas disponibles
UK
NL
DE
FR
Technical Data:
Type LED: COB
Brightness: 300 ~ 1500 Lumen
Battery: 3.7 V 8 Ah
IP rating: IP54
IK rating: IK07
Charging time: 6 hours
Run time: 3 ~ 12 hours
Working temperature: -20 ~ 50°C
Product dimensions: 128x99.5x46 mm
Power connection:
Use the lamp within places prescribed and governed by current regulations on workplaces and electrical systems. Check that the plug
fitted on the cable is suitable for the work environment, if it is not, it must be replaced by a qualified electrician.
Main features:
• Rechargeable flood light with COB LED technology
• COB LEDs provide 300 ~ 1500 Lumen
• Long life COB LEDs (life span 100.000 hours)
• 360° magnetic swivel base (58 N)
• M8 hole to support with tripod
• Powerbank function
• Low power consumption, low heat emission
• Lamp use is not affected by cold temperatures
• Cordless design improves safety, convenience and flexibility
• 3.7 V 8 Ah Li-Ion battery provides 3 ~ 12 hours constant light output
• Battery charge level indicator for easy monitoring
• Anti-glare diffusor
• IP54 rated
• IK07 rated
• CRI ≤80
• Robust, shock resistant ABS housing
Instructions for use:
• Charge the battery for at least 8 hours before first use
• To charge the lamp: connect the cable via the USB-C to the lamp directly. Then connect the USB plug to either the 100 ~ 240 V adapter (optional)
or any other USB power source available (Max. charging amp. 2 A) and then plug into a wall socket. Always charge on time to extend the battery
lifetime.
• The charge level indicator displays 25%, 50%, 75% and 100%, all 4 leds will lit up when 100% charging is complete
• The charge level indicator will show 1 flashing LED when charging is required, please re-charge in good time
• The work light is controlled by 4 buttons. 1. Power on/off, 2. Colour temperature button, 3. Intensity button, 4. Red warning light. Push the ON/OFF
button (1x) to turn the unit on. Push the colour temperature button to choose between 4 different colours, every time the button is pressed the next
colour with lit up. Push the intensity button to choose the right 20%, 40%, 60% or 100% setting (1500 Lumen). Push the on/off button to turn the
unit OFF
• Memory function: the lamp will turn on in the last used setting
• Do not leave the battery in a fully discharged condition. Recharge the lamp at least once every 30 days. Always fully charge the battery to extend
the battery lifetime. Always use the original charger
Accessories and spare parts:
80 cm USB-C cable
100 ~ 240 V USB-charger optional (SIN-100.1002A)
USB-car charger optional (SIN-100.1060-1 )
Use only accessories and spare parts approved by the manufacturer
Caution:
• Avoid looking directly into the beam
• Do not use the lamp near open flames
• Switch off the lamp when not in use
• Only use this lamp for the purpose it is designed to, all modifications are strictly prohibited
• Should any cable be damaged, it must be immediately replaced with one of the same type
• When plugging the charger into a suitable mains supply, always check that the device is in good condition, and does not appear damaged as this
may impair safety
Warranty/Service:
• 12 months from the date of the purchase – Proof of purchase is required to make any warranty claim
• The warranty does not apply in case of damage to the device due to negligent / improper use or accidental damage
2
ES
Lumen Laser class I
Protection class III
EAN: 8717775513438
Colour temperature: 2700/3500/4500/6500 K
Weight: 483 g
Technical data optional charger (SIN-100.1002A):
Voltage: AC 100 V ~ 240 V
Frequency: 50/60 Hz
Charger output voltage: 5 V 2 A
Publicidad
