Descargar Imprimir esta página

Perel VTBAL503 Manual Del Usuario página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
2.
Press the hold button to freeze the weight on the display.
3.
The weight on the display will be locked within 300 sec below the hold mode.
4.
If you want to exit the hold mode, press the hold button to exit.
6.5
Calibration
1.
In the shutdown mode, long-press the 'on-off' button and the same time quickly
press the mode button 4-5 times. The display screen will show an internal code.
Then release these two keys.
2.
Press the mode button again after you finish step 1. The screen will show 20 kg
first, then show the zero clearing.
3.
Put the weigh calibration on the scale.
4.
After the reading becomes stable press the mode button. The screen will show
PASS, then the calibration has been done.
7.
Cleaning and Maintenance
Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh
chemicals, cleaning solvents or strong detergents.
Do not immerse the device in any liquid.
8.
Technical Specifications
power supply ...................................................... 2 x 1.5 V AAA/R03 batteries (incl.)
material ................................................................................ ABS + stainless steel
capacity ........................................................................................ 100 kg/220 lb.
graduation ....................................................................................... 10 g/0.35 oz.
units ........................................................................................ g/kg/oz./lb./lb:oz.
dimensions ............................................................................. 298 x 248 x 37 mm
display .............................................................................................. 59 x 22 mm
weight .................................................................................................... 1.55 kg
Use this device with original accessories only. Velleman Group nv cannot be
held responsible in the event of damage or injury resulting from (incorrect)
use of this device. For more info concerning this product and the latest version
of this manual, please visit our website www.velleman.eu. The information in
this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman Group nv. All worldwide
rights reserved. No part of this manual may be copied, reproduced, translated or
reduced to any electronic medium or otherwise without the prior written consent of the
copyright holder.
V. 01 – 17/08/2023
VTBAL503
5
©Velleman Group nv

Publicidad

loading