Publicidad
Idiomas disponibles
Idiomas disponibles
1.
On/off: Press the on/off button to turn the appliance on or off.
2.
Speed: Press the speed button to adjust the speed.
Low → Mid → High → Low ... (repeating).
3.
Timer: Press this button to set your desired working time from 0.5h →1h →1.5h →... →7.5h→off → 0.5h ...
(Repeating). When the set time has elapsed, the fan will be off.
4.
Mode: Press the mode button to choose the functions from Normal → Natural → Sleeping → Normal ...
(Repeating). You can press the speed button to choose your desired speed level.
1) Normal mode: under this mode, the motor works with the preset speed.
2) Natural mode: under this mode, the appliance runs according to the natural mode program, generating
softer and more comfortable air volume. You feel like the wind from the nature.
3) Sleeping mode: under this mode, the appliance runs according to the sleeping mode program. Air volume
will weaken with the decrease of body temperature when you fall asleep, which will protect you from
catching cold.
5.
Swing: Press the swing button to control the horizontal rotation function on or off.
CLEANING AND MAINTENANCE
1.
Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains cable
from the socket.
2.
Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down
with a damp cloth and dry it carefully. Always take out the mains plug first.
3.
Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it occasionally
using a dry brush or vacuum cleaner.
4.
Warning: Do not use any cleaning chemicals such as detergents and abrasives. Do not allow the interior to
get wet as this could create a hazard.
5.
Place the appliance in its original box or cover the appliance to protect it from dust. Store it in a cool dry
place.
TROUBLESHOOTING
Do not repair or disassemble the unit by yourself. Unauthorized repair attempts will invalidate the warranty and
may cause personal injuries.
Issue
No power
Odour emission
from unit
Strong vibrations
and noise
If the above solutions do not resolve the problem, please contact the customer service.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50-60Hz
Power consumption: 50W
Possible Reason
1. Power cord is unconnected.
2. There is no power from socket.
New unit. When the unit is used for
the first time the fan motor may
produce an odour which will dissipate
within a week of use.
1. Fan is not used on a flat surface.
2. Fan may be damaged.
Solution
1. Connect the power cord.
2. Check that socket is turned on.
No action required.
1. Place on a flat surface. May put an
anti-vibration mat underneath.
2. If fan is damaged discontinue use and
contact customer service.
- 4 -
Publicidad
