Honeywell HWL-02E Pro Manual Del Usuario página 4

SAFETY WARNING
When you use the floor lamp, basic safety precautions should
always be followed:
Ensure that the power voltage is consistent with the rated voltage and frequency of the
lamp. If the power voltage doesn't match, it may cause parts damage, resulting in the
malfunction of the lamp.
Ensure that the product is correctly installed with fasteners and is placed on a flat, sturdy
surface for use to avoid inclining, falling, product damage, personal injuries and property
loss.
Do not place the lamp beside high-temperature objects or in humid environments, such as
stoves, gas and exhaust pipes, bathrooms, outdoors, etc., to prevent damage.
Please store the power cord of the lamp properly and do not place heavy objects on the
power cord to avoid trampling or damaging.
Ensure that the connected power has grounding protection. Improper power connection
may cause electric shock and lead to fatal risk.
Do not put your fingers in the connection gap of the lamp post when installing, otherwise,
injuries such as pinching can occur.
Consult an electrical professional when inspecting and repairing the lamp,
non-professional operation is prone to danger.
If the parts of the lamp are exposed, there is a possibility of electric shock, resulting in a
fatal risk. Before connecting the power, please ensure that the lamp has been completely
installed.
Climbing and swinging are prohibited to avoid injuries caused by accidental lamp falling.
Installation and maintenance are prohibited when the power is on.
WARNING: To prevent the occurrence of accidents that threaten
personal safety such as lamp damage, falling, electrical shock, fire,
and so on, please strictly follow the instructions for installation and
use, do not modify the lamp's structure, and exchange parts or
accessories.
EN | 2