Publicidad
Idiomas disponibles
Idiomas disponibles
Rating Settings
• Parental control
Playback of some DVD discs can be limited depending
on the age of the users. The parental control system
allows the playback limitation level to be set by the
parent.
• The lower the level, the stricter the limitation.
• If the rating of the loaded DVD disc is higher
than the level you set, the system will require a
password. Enter your password and press the
ENTER button to start playback.
1. Select the desired parental control level from the
menu, then press Enter button.
2. You will be prompted to enter your password. Use
the 0-9 buttons to enter 0000 (or your privacy password
if already established).
• No need to enter a password if "Password Mode" is
set to OFF.
• Set Password
You can set a new password for parental control.
The default password is 0000.
1. Select "Change" and press the ENTER button.
2. Enter 0000 (or your privacy password) using the 0-9
buttons.
3. Enter a new password.
4. Enter the same password again to confirm.
5. Press Enter button.
Misc Settings
• Screen saver
On
The screen saver starts up if nothing is played back and
no operations are performed for 4 minutes.
Off
The screen saver does not start up.
• HDMI CEC
You can use one single remote control to control
all HDMI CEC devices that connected via HDMI
connection.
On
Enable HDMI-CEC feature.
Off
Disable HDMI-CEC feature.
42
• One Touch Play
When you press POWER button on RC to turn on
this player, the TV (if the TV supports one-touch play)
automatically turns on and switches to the video-in
channel. Disc play starts if there is a disc in this player.
On
Enable one touch play feature.
Off
Disable one touch play feature.
• One Touch Standby
When you press and hold POWER button on RC, all the
connected HDMI CEC devices (if the device supports
one-touch standby) switch to standby mode.
On
Enable one touch standby feature.
Off
Disable one touch standby feature.
Note: If no display appears on the TV screen due
to unsupported resolution, reconnect any available
interlace video output to your display and readjust the
resolution settings to 480p/576p.
Picture Settings
• Sharpness
This adjusts the sharpness of the picture shown on the
monitor. Select High, Medium or Low using the Cursor
buttons, and press the ENTER button.
• Brightness
This adjusts the brightness of the picture. Use the left
and right buttons to change the value, and press the
ENTER button.
• Contrast
This adjusts the picture contrast.
Use the left and right buttons to change the value, and
press the ENTER button.
• Gamma
This adjusts the gamma value of the picture.
Select High, Medium, Low or None using the Cursor
buttons, and press the ENTER button.
• Hue
This adjusts the green/red balance of the picture (only
for progressive-scan and S-Video output).Use the left
and right buttons to change the value, and press the
ENTER button.
• Saturation
This adjusts the saturation level.
Use the left and right buttons to change the value, and
press the ENTER button.
DVD Microsystem
Publicidad
