Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE USING.
1. Before using it, remove all packing material and inspect the unit for any shock or other
damage. If there is a blow, scratch or other damage, please go to the place where you
purchased it and ask for it to be replaced by another one.
2. Check that the place where you are going to install the heater complies with all the safety
warnings described in this manual.
OPERATING INSTRUCTIONS.
1. Before plugging the heater into the electrical power, make sure that
position of the plug is correct.
2. If necessary, turn the plug so that the heater remains vertically.
3. Plug in the heater and press the on/off switch.
4. Select the desired temperature with the buttons (4) and (5).
5. When your use is finished, press the on/off switch to OFF.
6. Unplug the electrical power and allow it to cool.
OPERATION OF THE TIMER.
- While the heater is plugged in and on press the button (2).
- Press repeatedly until the number of hours before switching off is selected.
- Example: if you want it to turn off within 2 hours, select 2 hours.
- To cancel the selected time, turn off the heater.
- When the heater turns off automatically with the timer,
Turn off the side button and unplug as soon as possible.
Off Cycle.
When you press the off switch from the remote controller, the heater
disconnect the resistor and it will work for a few seconds with only the fan until
cool down to the unit and then it will turn off.
MAINTENANCE.
- Your heater must be unplugged from the electrical power before cleaning.
- Clean the device with a lightly moistened cloth or brush or duster to remove dust.
- Never use abrasive or flammable products to clean the appliance.
- Never immerse the heater in water.
- Clean the air inlet and outlet regularly with a vacuum cleaner.
- If you are not going to use your heater for a long period of time,
store the heater in a cool, dry place where it does not pick up dirt or dust.
Publicidad
