VONROC BS501AC Traducción Del Manual Original página 7

• Only use sanding belts that are suitable for use
with the machine.
• Only use sanding belts with the correct di-
mensions. Make sure that the sanding belt is
properly mounted.
• Inspect the sanding belt before each use. Do
not use sanding belts that are worn because of
prolonged use.
• Never put the machine down on a table or
a workbench before it has been switched off.
Electrical safety
Always check that the voltage of the power
supply corresponds to the voltage on the
rating plate.
• If the supply cord of this power tool is dam-
aged, it must be replaced by a specially pre-
pared supply cord available through the service
organization.
• Only use extension cables that are suitable for
the power rating of the machine with a minimum
thickness of 1.5 mm . If you use an extension
2
cable reel, always fully unroll the cable.
2. MACHINE INFORMATION
Intended use
The machine is designed for sanding wood, plas-
tics and metal with high removal capacity. This ma-
chine is suitable only for dry sanding. The machine
is not suitable for processing objects containing
asbestos. Improper use may damage the tool.
TECHNICAL SPECIFICATIONS
Model No.
Voltage
Frequency
Power input
No-load speed
Belt size
Sanding pad size
Weight
Sound pressure level L
PA
Acoustic power level L
WA
Vibration
WWW.VONROC.COM
BS501AC
230V ~
50 Hz
710W
120-380/min
76x457 mm
76x140 mm
2.8 kg
L =89dB(A) K=3dB(A)
PA
L =100dB(A) K=3dB(A
WA
a =3.41m/s² K=1.5m/s²
h
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN 62841-1 and
EN 62841-2-4; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
• The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-4.
1. On/off switch
2. Lock-on button
3. Main handle
4. Machine
5. Dust box
6. Dust outlet adapter
7. Dust outlet
8. Auxiliary handle
9. Lever for auxilary handle
10. Speed adjustment wheel
11. Sanding belt paper
12. Clamping lever for sanding belt
13. Centring knob for sanding belt
14. V-belt cover
15. Front cover
16. Power cable
17. Rear roller
18. Front roller
3. ASSEMBLY
Before assembly, always switch off the machine
and remove the mains plug from the mains.
Dust extraction (Fig. B, C)
It is highly recommended to use the machine
with either the dust box (5) or a suitable vacuum
cleaner, ensuring optimal dust collection. To mount
the dust box:
EN
7