Clean Air Optima CA-502 Manual Del Usuario página 5

Control Panel / Operation Instruction
1 Power Button
Pressing the Power button you turn the device on and off.
(Default is Auto mode after turning on the device).
Air Quality Indicator Light on front of Air Purifier will illuminate different colors as PM2.5 sensor
evaluates air quality. Once complete, color will reflect current air quality. See chart for air
quality levels.
2 Speed mode
By pressing the Speed button, you can change the speed level. There are several fan
speeds available. You can choose the auto mode, speed 1, 2 or 3. Touch the fan speed
button repeatedly to select the mode.
In the setting Auto the integrated smart sensor (Intelligent Particle Sensor™) measures and
regulates air quality automatically. The fan, controlled by a sensor anticipates automatically
to what extent indoor air is polluted by particles size PM2.5 and adapting to the 3 different
speeds accordingly.
The similarity to automatic mode is shown as follows:
If the PM2.5 value is between 0 and 35, the speed indicator light will show a 1.
If the PM2.5 value is between 36 and 55, the speed indicator light will show a 2.
If the PM2.5 value is between 56 and 999, the speed indicator light will show a 3.
3 Sleep
When the sleep mode is activated, the display will turn off. Only the sleep mode light
is on. The fan speed goes to the lowest setting.
4 Child Lock
Child lock protects from unwanted use of the device.
The child lock is switched on/off by pressing and holding the sleep button for 3
seconds until a beep sounds.
5