Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE USING THE WRENCH
BATTERY INSTALLATION
◼
Remove the battery cap.
◼
Insert two AAA batteries matching the
-/+ polarities of the battery to the battery
compartment.
◼
Put on the battery cap and fasten it tightly.
ATTENTION:
When opening the battery cover of wrench, you
can see a viewing window for the water contact
indicator. Through this viewing window, you
can check if this wrench is damaged by water
penetration if the water contact indicator turns
red.
POWER ON AND RESETTING THE WRENCH
◼
Press
to power on the digital torque wrench.
◼
Usually press
wrench before using it.
ATTENTION:
If an external force is applied to the torque
wrench during power-on/reset or wake up period,
an initial torque offset will exist in the memory.
ACTIVATION DURING SLEEP MODE
◼
The wrench will auto sleep after about 5 minutes
without use for power saving. Press
wake up the wrench during the sleep mode.
RESETTING THE WRENCH
◼
If the wrench does not function normally,
Press
together to reset the wrench.
LOW BATTERY VOLTAGE PROTECTION
◼
If the battery serial voltage is in low voltage
status, the wrench will display a battery symbol
and then turn off after a while.
to reset the digital torque
to
3
Publicidad
