DeLOCK 42635 Manual Del Usuario página 2

English
Description
This enclosure by Delock enables the installation of an M.2 PCIe
NVMe SSD or SATA M.2 SSD in 2280, 2260, 2242 and 2230
format. It can be connected directly via USB-C™ plug to the PC or
laptop.
Combo enclosure
The big advantage of this Delock M.2 enclosure is that both SATA
and PCIe (NVMe) M.2 SSDs can be inserted into the enclosure.
The memory is automatically recognized by the chipset and can
then be used.
SSD installation without tools
The special feature of this enclosure is that no tools are required
to install the M.2 SSD. The lid is pushed backwards and the SSD
is plugged into the slot, the SSD will be attached to the PCB with a
rubber nipple and then the lid is reattached until it locks.
Specification
• Connectors:
external: 1 x USB 10 Gbps USB Type-C™ male
internal: 1 x 67 pin M.2 key M slot
• Chipset: Realtek RTL9210B
• Supports M.2 modules in format 2280, 2260, 2242 and 2230 with
key M or key B+M based on SATA or PCIe (NVMe)
• Maximum height of the components on the module: 1.5 mm,
application of double-sided assembled modules supported
• Supports NVM Express (NVMe)
• Bootable
• Supports UASP
• Data transfer rate up to 10 Gbps
• LED indicator for power and access
• Lanyard strip for cap
• Dimensions (LxWxH): ca. 115 x 30 x 11 mm
-2-