Publicidad
Idiomas disponibles
Idiomas disponibles
USING THE PRODUCT
CONTROL AND INFORMATION DISPLAY DEVICE
MAT SENSOR
There are four sensors under the mat, when the user steps on balance scooter mats, it will automatically
initiate the self-balance mode.
A. While riding balance scooter, you must ensure that you are stepping on the foot mats, please
don't step on any other area besides the mats.
B. Please do not put any objects on the mats, which will make balance scooter switch on, and
increase the probability of collision and cause injury to people or damage to balance scooter.
DISPLAY BOARD
Display boras is located on the middle of the balance scooter. It is for displaying the current information.
A. Battery display: this green LED light indicates balance scooter is fully charged, or battery power
is more than 20%, red LED light indicates the power is down to 20%, when LED light become
red, please recharge it.
B. Running LED: When the operator triggers the foot switches, the running Led will light up in
green, which means that the system has entered the running state; when the system has an
error in operation, running LED light will turn to red.
Battery display
SAFE-USING OF BALANCE SCOOTER
We hope every user can ride balance scooter safely and enjoy the fun. You can recall the memories of
learning how to ride a bicycle, drive a car, ski or use similar means of transportation; all these experiences
can be applied.
1.
Please follow the related content in "Product Manual". We strongly recommend that you read
the "Product Manual" carefully before riding balance scooter the first time. Check whether tires
are damaged, or parts are loose before driving. If there is any abnormal situation, please contact
local dealer for repair.
2. Please carefully read the "Product Manual", this will help you to get a lot of important safety
information such as speed limits, vibration alert and safety shutdown, etc.
INSTRUCTION MANUAL HOV-10
49
Running LED
EN
Publicidad
