Publicidad
Idiomas disponibles
Idiomas disponibles
Non-Adjustable Stands
Aluminum, non-adjustable stands are available as an option
for permanent mounting to a countertop. They are available in
heights of 409 mm (16").
1. Determine the exact mounting location.
2. Prepare the location of each stand mounting flange on the
mounting surface. It is recommended to use the included
template for best results.
a. Lay the included template on the countertop in the
mounting location for accurate mounting hole and conduit
hole locations. Use the "Stand Mounting Measurements"
table and the illustration for mounting dimensions, if the
template is not available.
b. Verify which stand will have the conduit passing through
it and the mounting surface. Re-orient the included
template, if necessary.
c. If necessary, remove the backing from the template and
carefully lay the template onto the mounting surface at
its appropriate position.
d. Drill holes through the approriate locations on the
template based on the unit size.
e. Remove the template from the countertop, if necessary.
3. Feed the conduit from the unit through the appropriate
holes, and position the unit on the mounting surface.
4. Fasten the stands to the mounting surface using appropriate
fasteners (not supplied by Hatco). Each mounting flange
has two mounting hole locations.
5. Have a qualified electrician perform the necessary electrical
connections to the on-site electrical system
NOTE: Mounting hole size will be determined by fastener size.
Form No. HL5CEM-0420
OPTIONS AND ACCESSORIES
Stand Mounting Measurements—NTL16
Outside
Model
Flange (A)
HLC5-30
746 mm
(29-3/8")
HLC5-36
899 mm
(35-3/8")
HLC5-42
1051 mm
(41-3/8")
HLC5-48
1204 mm
(47-3/8")
HLC5-54
1356 mm
(53-3/8")
HLC5-66
1661 mm
(65-3/8")
HLC5-78
1966 mm
(77-3/8")
Top view of mounting flanges.
Stands removed for clarity.
Conduit Hole
9
Inside
Mounting
Flange (B)
Holes (C)
664 mm
690 mm
(26-1/8")
(27-3/16")
816 mm
843 mm
(32-1/8")
(33-3/16")
969 mm
995 mm
(38-1/8")
(39-3/16")
1121 mm
1148 mm
(44-1/8")
(45-3/16")
1273 mm
1300 mm
(50-1/8")
(51-3/16")
1578 mm
1605 mm
(62-1/8")
(63-3/16")
1883 mm
1910 mm
(74-1/8")
(75-3/16")
A
B
Mounting Holes
(63.5 mm [2-1/2"]
on center)
C
Publicidad
