Nexxt Solutions NHC-IP10 Guia Del Usuario página 3

Package content
• Smart camera
• USB cable
• Power adapter
• Wall screw (x 2)
• Wall anchors (x 2)
• Wall mount bracket
• Quick start guide
Plase use a 6.0mm
diameter drill
Template sticker
Coupling slots
Wall mount bracket
Smart camera
Wall screws and anchors
and tabs
Camera base
Mounting the camera
This camera has a base with three padded support points for
placement on a at surface, such as a desk, shelf, or table.
For the wall mount option, follow the instructions below:
Wall mounting instructions
• On the surface and at the height selected for placing the camera,
use the template sticker included in the box and mark with a
pencil the location of the boreholes where the wall mounting
bracket will be attached.
• Use a drill to bore the holes and insert the wall anchors.
• Screw the bracket rmly onto the wall.
• Now attach the camera to the bracket. To do this, you must align
the slots in the circular groove on the base of the camera with the
tabs on the mounting bracket (see illustration).
• Rotate the base of the camera counterclockwise to lock it on the
bracket.
Note: To remove the camera, simply rotate its base clockwise until the
slots on its base align with the tabs on the bracket and detach it.