Publicidad
Idiomas disponibles
Idiomas disponibles
To remove:
1.
Disconnect the belt sander from the power source.
2.
Grip the dust bag firmly, and pull it out from the tool.
NOTmOE: For longer periods of use, or on large pieces of work, it is advisable
to use a suitable
vacuum cleaner. Attach an 1-1/4 in. wet/dry
vacuum
hose to
the dust-exhaust
port. It is advisable
to also wear a suitable
dust mask, as there
may be residual airborne
dust particles in the area.
,_, WARNING:
The dust that is produced
while sanding
can be detrimental
to
health, flammable,
or explosive.
Suitable safety measures
are required.
Example:
Some types of dust are known to cause cancer. Always wear a dust mask and
use the proper dust collection
method: dust bag for small volume and vacuum
connection
for large volume dust collection.
THE LiVE TOOL iNDiCATOR
The belt sander is equipped
with
a live tool indicator
light (Fig. 6).
When the tool is plugged
into
a power source, the Bivetool
indicator
will illuminate green
to remind you that the tool is
plugged
in. When the tool is
unplugged,
the indicator
Bight will
turn off.
Fig. 6
\
Live tool indicator
light
SELECTING
THE RIGHT
SANDING
BELT
Different sanding
belt grits may be purchased
from the store where you
purchased
the tool. Available
grits are: Coarse, Medium
and Fine.
Use a coarse grit to sand down rough finishes,
medium
grit to smooth the work
and fine grit to finish off.
It is best to make a trial run on a scrap piece of material to determine
the best
grits for a particular job.
SANDING
This sander can be used for sanding operations
on materials
such as wood,
plastic, metal and painted surfaces.
Do not use the sander for wet sanding.
,_
WARNING:
Finish sanding
can produce
clouds of fine sanding
dust that
could ignite in the presence of sparks or an open flame. To avoid injury, always
use your sander in a well-ventilated
area, away from sparks and flames.
,_
WARNING:
Before sanding,
make sure that the sanding
belt is securely
installed
in place.
14
Publicidad
