Publicidad
Idiomas disponibles
Idiomas disponibles
USING THE PRODUCT
ATTENTION Charge the battery prior to use. • Make sure that the power is turned OFF when the
scooter is not in use. • Always wear a helmet and appropriate safety equipment and always keep
both hands on the handlebars and both feet on the deck whilst riding.
CONTROLS AND FEATURES
2
4
5
7
1.
Console - Provides scooter and trip information.
2.
Decelerator Paddle – Press downward to cut power to the motor and use the motor as a brake.
3.
Accelerator Paddle – Press downward to accelerate.
4.
ON / OFF – Press and hold for approximately 3 seconds to switch the scooter on or off.
NOTE: The scooter will automatically switch OFF if left idle for 3 minutes.
Select Display – Press to alter scooter display information between trip time, trip distance meter, odometer,
motor speed (RPM) and battery voltage.
5.
Decrease Speed – Press to lower motor speed from "3" to "2" or "2" to "1".
6.
Increase Speed – Press to increase motor speed from "1" to "2" or "2" to "3".
Reset Trip Distance Meter – Press and hold to reset trip meter to "zero".
7.
Mobile phone USB charging port.
8.
Battery Charging Port – Connection point for the battery charger.
9.
Rear Brake – Step on mudguard to apply rear brake.
10. Tail Light – Safety feature for added visibility that illuminates on scooter movement.
11. Headlight Switch –Press to switch headlight on / off.
9
6
8
37
ELECTRIC SCOOTER OCP100CG
1
3
10
11
EN
Publicidad
