Sony CFI-ZDD1 Manual De Instrucciones página 5

5
Align the disc drive's clips with the 2 holes
(marked with ), and then firmly push in until
you hear a "click".
6
Attach the cover and horizontal stand feet
(long) included with your disc drive.
Align the cover's clips with the corresponding holes
on the console and push in until you hear a "click".
7
Connect the AC power cord and cables, and then
turn on the power.
Attach or remove the disc drive
Remove the disc drive
Place your console on a soft dry cloth spread over a flat
surface before removing your disc drive.
1
Follow steps 1 to 4 of "Attach the disc drive".
2
Use your finger to lift up the concave part of the
disc drive and remove it.
3
Attach the cover, and then attach the
feet (short).
Use the cover and feet that you removed in steps
3 and 4 of "Attach the disc drive".
4
Connect the AC power cord and cables, and then
turn on the power.
EN
Concave part
5