Publicidad
Step 13
14
3
3
Attach a slat L onto top front side rail H and top
back side rail I with flat head screws (3). Make
3
sure the slat touches the headboard top cross E
3
as possible.
3
3
Attach the other slats L onto the top front side
3
3
rail H and top back side rail I with flat head
3
screws (3). Use space block (14) to space then
3
out evenly.
3
I
NOTE: If you notice that any of the slats L are
3
not perfectly flat, be sure to assemble them so
that the slats L curves up in the middle and
down on the ends.
3
X14
22
Publicidad
