Clean the accessories (Spout insertion, blade holder and pusher) with soapy water. Rinse and dry
thoroughly.
Choose the blade which corresponds to the desire use e.g. thick slicing blade (K).
Put the thick slicing blade (K) in to the blade holder (L) (Fig.1).
Put the whole blade holder (L) assembly in to motor unit (A) (Fig.2).
Revolve blade holder (L) assembly fit motor unit (A) (Fig.2).
Draw out power line & plug in the appliance (Fig.3).
Press the inching switch button (H) (Fig.4).
Insert the food through the food tube (J) and push the food down using pusher (I) (Fig.5).
When finished the processing, first loose inching switch button (H) to stop the machine then disassemble
the assembly (Fig.6).
Spin pusher (I) out from blade holder (L), Spin blade holder (L) out from the motor unit (A) (Fig.7).
Spin thick slicing blade( K( out from the blade holder (L) (Fig.8)
Put the cleaned and dried blade holder (L) in to motor unite (A), put the cleaned blade in to Cup (B)
(Fig.9).
The power line income line box, put the pusher(I)in to blade holder (L).(Fig.10)
WARNING: NEVER PUT YOUR HAND OR FINGER INTO THE BLADE HOLDER WHILE THE MACHINE IS
WORKING.
Carrots
Courgettes
Potatoes
Cucumber
Pepper
Onions
Beets
Cabbage(white/red
)
Apples
Chocolate
Coconuts
Nut
Dehydrated bread
Ginger
Coarse
Fine Grating
Grating
Blade(C)
Blade(D)
●
●
●
●
●
●
●
●
●
●
●
●
Grinder
Thin Slicing
Blade(E)
Blade(F)
●
●
●
EN-6
Thick
Slicing
Blade(K)
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●